Jesmonite & Concrete Super Seal Wax 60ml, Step 3

Write a review

All Natural Polishing Wax

Specially formulated for Jesmonite AC100&AC300 and Concrete

Step 3 High Seal Polishing Wax - Seals, Shines and Protects. Recommended to use after using the Step 1 Wax Wash and Step 2 Wax . The 3 steps of waxes used together create a seal in which water runs off and you have a beautiful finished surface. You can also use it individually to create modest barriers to your surfaces.

Tricks and Crafts offers a three-part wax procedure, if you want a complete gleaming result, check out - Jesmonite & Concrete Wash Wax 60ml (Step 1) and Jesmonite & Concrete Wax 60ml (Step 2).


1. After your item is fully dry from the lovely wax wash and you have already applied Step 2 wax, it's super seal time.
2. Scoop a small amount of the super seal wax and rub the wax into the surface of your item.

(TIP) "Make sure your hands are warm so the wax could melt into fingers"

3. You can use a microfibre cloth or soft towel to remove any excess product of the surface (this is a very important step).
4. Then the magic happens when you rub your item with a microfibre cloth or a hi-shine cloth, you will begin to see the surface getting a little bit more shiny
5. If you are satisfied with the results, you can leave it at that or go a step further by buffering the surface and the wax will give you a really great shiny finish that does not detract from the beauty of your object


All Tricks and Crafts waxes are all natural, skin-friendly and can be applied to the surface with your bare hands. No gloves are required.

Ingredients: Beeswax, Food-graded Mineral Oil, Shea Butter, Fragrance safe for skin

Made in UK

Next day shipping*

Packed with care

How to use Tricks & Crafts 3-steps Wax System with Jesmonite

You can get a beautiful, shiny, water-resistant finish surface by following the three-step wax procedure offered by Tricks and Crafts.