Jesmonite & Concrete Wash Wax 60ml, Step 1

Write a review

All Natural Polishing Wax

Specially formulated for Jesmonite AC100&AC300 and Concrete

Tricks and Crafts wash wax is a great product to make you quickly forget about the long sanding and reminding you of how beautiful your Jesmonite and concrete pieces are.

Step 1 Wash Wax - Cleans, Seals and Protects. This begins the sealing process by cleaning off the dust and filth from your surface, followed by a small sealing action. It can be used immediately after sanding your Jesmonite or concrete pieces.

A lovely creamy texture that leaves your surface clean and slightly matt sealed. Use the Tricks and Crafts wash wax whenever you need to clean any type of jesmonite or concrete surface and to create a small sealing action. Also, recommended when you want a slightly matt sealed surface.

Tricks and Crafts offers a three-part wax procedure, if you want to go further for a gleaming result, check out - Jesmonite & Concrete Wax 60ml (Step 2) and Jesmonite & Concrete Super Seal Wax 60ml (Step 3).


1. Rinse your item with warm water. The item can be wash waxed straight after sanding. Also, if you use our next steps waxes after that please leave the item to fully dry for 24 hours
2. Scoop out a small amount of the wash wax and start to rub the product into the surface of your item
3. Make sure the whole item is covered with wash wax
4. Then rinse the item with warm water
5. Pat dry with a soft towel or microfibre cloth


All Tricks and Crafts waxes are all natural, skin-friendly and can be applied to the surface with your bare hands. No gloves are required.

Ingredients: Beeswax, Food-graded Mineral Oil, Shea Butter, Fragrance safe for skin

Made in UK

Next day shipping*

Packed with care

How to use Tricks & Crafts 3-steps Wax System with Jesmonite

You can get a beautiful, shiny, water-resistant finish surface by following the three-step wax procedure offered by Tricks and Crafts.